Originally Posted by shady visions
Well, I just picked them up today, and they are Dual 4-OHM voice Coil Over. I will be running 2 speakers, probably off of one two-channel amp. I will try and match up the 300RMS for each speaker, so I guess I will be looking for an amp that can put out 300RMS @ 4OHM x 2channels?
You probably have another set. Those in the link are not DVCs. Anyway, if they are 4OHM DVC and you have a pair...you can do the following.
http://edesignaudio.com/product.php?...pid=33&cur=USD
Elemental Design nine.2x
RMS Power @ 12.5v :2 x 300 @2Ohm, 1 x 600@4Ohm
You can bridge that amp and wire each subwoofer in parallel making each subwoofer 2 OHM. Then take the pair and wire them together in series to get 4 OHMs. That will get you 600w x 1 @ 4OHM. And that amp is slightly underrated from what I have seen. So the subs will be happy.