1. Using a flat-tip screwdriver wrapped with protective tape, pry out on the lower portion of the cover to release the hooks , then remove the cover.

2. Remove the screws.

3. Remove the inner handle from the door panel.

-1 Pull the handle forward and out half-way to release the hook.
-2 Pull out the top of the handle.
-3 While pulling on the handle, disconnect the inner handle rod.

4. Disconnect the power door lock switch connector , then remove the inner handle.

5. Remove the power window switch buy lifting it upward out of the panel (clips hold it in)

6. Remove the screws from the door panel and then remove the panel (it to is held in with just screws after the screws bihind the switch is removed)