Originally Posted by turbohcar
Well, I'm going to go to work tomorrow and see if I can find the parts at a decent price. If all goes well, I'll go look at it tomorrow night and decide what I want to do. Honestly, it's not the work that scares me. The wiring harnesses seem like they would be a weekend project (apiece if need be) so it really depends on the availability of funds and parts. After I get things back in order to where I feel comfortable driving it, I think I'll probably pay for a timing belt, tensioner, and oil pump job as it's probably not been done in quite a while.
Thanks again for your help. Is there a specific person/place you could refer me to that would have either of the harnesses or the motor mount? I figure after all is said and done I'll have about $400 in it in parts alone before I do the timing belt, tensioner, and oil pump. So, if I could get it for $3100 out the door, I'd be happy.
try searching e-bay for a harness for a obd-1 vtec engine. If it's just the harness it'self that need redone that can be done in about an hour or so. If you need to resplice the engine side plugs then you may have more time into it.
The mount isn't a very big problem, I never ran one in my last car and had no issues. You could fine one in a junk yard, any 94+ integra or 95+del sol VTEC (make sure it's the dohc del sol). The b-series mounts are all the same (gs-r,ls,rs, dohc del sol)...
Water pump, timing belt. The oil pump and tensioner should be fine unless your having problems... Good luck if you go through with the project, if you have anymore questions post away...