first put the transmission lever into "1" or all the way down. Then remove the panel around the radio, you can remove the square plastic plug on the bottom left of the radio panel with a small screwdriver put your finger in the hole and pull out the panel carefully. You will see that the panel extends to just underneath the shift lever. Once it's free, unplug all connectors and set it on the pass. seat. Then remove the phillips screws just under the clock/vent assembly, now pull it out carefully on the right side and bend it back(be extremely careful) enough to access the small little bulb.(look at your new one for referance) carefully unscrew it and install your new one, reassemble everything, that's it.