Hey Guys,

On my way home from class, i wanted to test vtec just to make sure everything was A OK. anyways, i am used to engagement at 5,500 rpm, it didn't engage until about 6,700 RPM. I then stopped, and tried again, this time, it didn't engage at all. I went straight home, checked oil and the oil is perfectly clear with about 2000 miles and filled properly. i then check connections to the vtec selonoid and everything seem fine. I REALLY NEED HELP TO GET THIS FIXED. ANY AND ALL ADVISE IS GREAT. I have all ready searched and cannot solve, so don't be abnoxious and tell me to search other forums.

From talking with another member (sherwood) my lower cams are taking me up to about 6K RPMs and normally, higher cams should take over at 5.5K RPMs. After 6K RPMs, acceleration almost comes to a hault. It doesn't accelerate that fast after 6K rpm's and i hear nor feel vtec. PLEASE HELP

Background info:
B16a2 w/ about 40K miles in a Del Sol
I/E/H, B&M FPR, etc...


Thanks in advance for the help