You bleed the clutch just like you would a brake, only it's easier becasue there is only one line. You need a buddy. Have a friend press the clutch pedal to the floor and leave it there. when the pedal is down, you loosen the bleed bolt on the slave cylinder and let it bleed for a few seconds (don't get brake fluid in your eyes). Tighten the bolt and have your friend take his/her foot off the pedal and then back to the floor. You then loosen the bolt and bleed again. Do this over and over 10-15 times. KEEP AN EYE ON THE LEVEL OF FLUID IN THE MASTER CYLINDER, it will go down fast and will need to be refilled. DONT LET THE LEVEL GET LOW AND LET AIR IN. Also, make sure the person helping you doesn't take their foot off until you have the bleeder bolt retightened! Wash up and go for a test drive. Bleed more if you need. Make sure you wash any brake fluid off of your paint because it will eat paint.

Hope this helps.