First, Thanks for your help! The spindles aren't on the car. I have them removed. I'm doing a disc brake conversion on my EK. So I do have a good side to reference to. I was told the oxy/acetalene torch would be the thing to use. I was just going to try it with a propane torch but your saying this might not be enough heat? I have priced a junkyard/used spindle so thats probably what I'm end up going with. But I will have to order and ship it because there isn't a one in my area (we got the only wrecked 99-00 Si in the area from the boneyard).