Originally Posted by Omniscient
If you get say a GSR throttle body on a b16 manifold, it will work, but it would work even better if you bored your manifold or got a GSR manifold.
:nono: you can NOT run a GSR mani on a b16a. The bolt pattern is different, and I dunno why you would want to anyhow.
me personally, I went with a JDM p30 intake manifold with a JDM Sir-G throttle body. The skunk2 and ITR mani will give you slight gains but nothing really usable as it is more noticeable very high in the rpms range not down low. If you want trq it is gonna be through FI. Also just a pet peave, but you have a header not header(s). Also, running the type-R ecu can actually hurt you more than help you as it is set up to run a completely different compression, cam profile, etc.