qtiger: the engine doesn't shake no. There's no other obvious indications.

Lipscomb: I got new pistons, pins and rods. The pins are held in by circlips and not pressed, but otherwise went in fine. The timing was checked with an inductive gun, and I'm running about -3* from stock spark advance, for the turbo.

Mike: The inspection has already been done once during the rebuild, and again after it was run a little bit. The crank was polished, checked for align bore and reinstalled. Other than watching for a dummy light, I have no way of monitoring oil pressure. My pops said something along the same lines, where maybe a galley was clogged and that was causing a rocker arm to run a little dry.

Thanks for the help guys.