View Single Post
Old Sep 26, 2005 | 10:18 PM
  #13  
RevengeCRX's Avatar
RevengeCRX
89 CRX si, now with b16!
 
Joined: Mar 2005
Posts: 456
Likes: 0
From: Las Vegas, NV
Default

Originally Posted by shady visions
Yeah, I'll try all of that tomorrow. I think I did take the battery out of the car once and put it in my mustang and it powered it up fine. But that was a while ago, I'll try it tomorrow. Anyways, if it is on painted metal, it could be a bad ground?

Also, will electrical tape help fix any of my wires? I have a headlight wire that looks like it was chewed through partially, and i want to know if I can just electrical-tape it up. Otherwise, I am going to look for a new wiring harness?
Cool. Yes, a ground connected to a painted part of the body is definitely a bad thing. If you only have that ground to work with however, just grind down the paint until bare metal is exposed, and that may solve your problems.
:chuckles: I use electrical tape on just about everything on my car. I got like 10 rolls laying around. Good electrical tape will fix wires, but posi-locks or soldering are the best ways to hold wires together, unless you're talking about exposed wires, yeah just electrical tape the shit out of them . Posi-locks can be purchased at autozone, but they're a bit expensive, like $7 for 15! You won't need to get a new harness unless multiple wires are damaged, like my car: all the wires leading to the passenger lights are destroyed, and one wire has shorted all the way to the fuse box! But somehow the car still runs fine! I just ghetto rigged the passenger headlights by splicing them into the driver's side, no problems, no dimming lights. :chuckles:
Reply