The easiest/cheapest way to change out your wheels all the time is to get a normal drill (like 18v) and a beam-type torque wrench. The torque wrench takes a 19mm deep socket (so the wrench clears the fenders), and the drill takes a 1/2" square socket adapter and then a normal 19mm socket. The drill will make it easier to get each lug nut past the 10 or so turns on and off.
Also, I put a dab of anti-sieze on each wheel stud.
Originally Posted by CivicSiRacer
There are something like 9 different SCCA regions within a 2 hour drive for me. 9 more non-SCCA, and about 10 more if I travel more than 2 hours.
B@stard!!1!