Originally Posted by B18C Turbo

If you bought the engine already thats cool. But why not do an LS/Vtec? That would be sick. You can get a NO machining required kit from Golden Eagle for $200 on ebay. The kit includes a modified head gasket, oil sandwich plate with oil line to the head, a plug for the head and tap. All fittings required and no machining dowel relocation pins for alignment of the head. Dont forget vtec oil control orfices and 0-rings. While your here, swap in some ITR pistons on the stock Pr4 rods. Buy a P28 chipped ecu or a GSR or civic si ecu to run the vtec. Some cam gears, new gaskets and bearings, a new timing belt, water pump, maybe a new oil pump, defintely new head bolts and your ready to rock!