Originally Posted by 96haccord
the fuse box diagram you gave me let me fix the electical probs. on my accord, I would like to know if it is possible to get help on a 94 geo prizm 1.6? I know it's not a honda, but i was hoping you would be able to help. I just need a diagram for removing/installing the fuel pump. thanks.
Glad it helped
Here's the Geo info:
REMOVE OR DISCONNECT:
Relieve fuel system pressure.
Drain fuel tank.
Rear seat cushion.
Fuel Tank Floor Service Hole Cover
Four screws and floor service hole cover.
Fuel sender assembly electrical connector.
Fuel Sender Hose Connections
One nut and fuel feed hose from sender assembly.
One clamp and fuel return hose from sender assembly.
Fuel Sender Removal
Eight bolts and fuel sender assembly from fuel tank.
INSTALL OR CONNECT :
New fuel sender gasket.
Fuel sender assembly to fuel tank; secure with eight bolts. Tighten bolts to 35 in.lbs. (4 Nm).
Fuel return hose to sender assembly; secure with one clamp.
Fuel feed hose to sender assembly; secure with one nut. Tighten nut to 22 ft.lbs. (30 Nm)
Fuel sender assembly electrical connector.
Floor service hole cover; secure with four screws.
Rear seat cushion.
Refill fuel tank.
Negative battery cable. NOTE: Turn ignition switch on and momentarily connect a jumper between DLC terminals "+B" and "FP" to pressurize the fuel system. Check for any fuel leaks.