wiring is pretty easy from what i've heard. when you get the amp kit with your power wire, remote turn on wire and your RCA cables, you connect the power cable to your positive side battery, find a hole in your firewall and put it through there, from the engine back b/c of the fuse, then run the RCA and remote turn on(its blue) down under your carpet to the trunk. you have to take off one of your panels and then the carpet will peel right back. then you can just slide it up your back seat and run it into your trunk. takes about an hour or two if you can find the whole in ur firewall. if not then you have to drill one but you should be able to find one.