I wanted to do the same thing on my integ before i went to the JDM conversion. My first idea was to use the harness bulb from civics and retro-fit them into the high beam because i think they just use one bulb for high and low beams, but i was not skilled enough to perform this on my own. Another idea was to use a high speed drill to make a second hole and put another bulb in there but if you've seen the housing, you'd see that it's difficult but possible. One concern I had in this option was how delicate the chrome housing was. I wouldn't want to mess it up and have it start to flake on me. Also i didn't know how the housing would project the light from the extra bulb. Another idea was to make a ring that fits around the original bulb and can hold another bulb (like the ones in the bumper lenses) underneath the high beam bulb. I would've soldered the power and ground wires to it and amplify the light intensity by using a relay. This option would look ghetto though...in the end i just ended up going jdm. These are just some ideas. maybe they'll help. Good luck!:thumbup: