Ok maybe this has been asked 1mill times. But I did do a search and came up with nothing. I just did my LSVTEC 91block(running strong when straight LS) and a type r head. The head was decked, pressure tested,more port and polish,sand blasted. So I know my head is good. I installed everything and started it up. I drove it around for a bit maybe 8mins total. it's all installed in a 95 sedan. Umm it felt weak like it had the power of a y8 at the most. So where I did the job was about 50miles away from home. So I drove home and it felt a bit stronger when I got home. So I let the car rest about 8 hours got in and drove it around a bit more felt a lot like an ls at this point. Know I had a small leak only when I pushed the car so I got that fixed. everything else is running good now. But it just feels weak. And when VTEC kicks in it's like nothing is going on but the extra noise. I am running a GSR ECU. Timing is on point. I am running B16 cams,B16 Intake manifold,stock headers,2¼ piping catback,GSR tranny. I Hope I am making this 100% clear. I will be installing GSR cams this weekend. But for now I know the VTEC should be kicking in a whole lot harder. PLEASE HELP!!!!