wedge a flathead with a towel over the tip under your clock and push downward on the screwdriver so it pops your clock up, pull it out. unlatch it from the wire harness as well as the harness for the emergency flashers. unscrew the bolt behind with a long, magnetic phillipshead screwdriver.

unscrew the bottom two near your tray with a stubby phillipshead screwdriver. lift from there upward and outward, you will hear the snaps of the two retaining clips from the top. remove gently. unhook the two wire harnesses from your climate control unit. one of them may need the help of a flathead screwdriver near the removal tab. it'll make it much easier.

now you have the face off and you can take the rest apart however you want.