well today being day # two on the omni full coilover install started off well. after finishing the front i moved to the back. lower strut bolt came out good, upper control arm bolts came out good and i installed the new strut/shock into the right side after preloading. then i moved on to the left side. well the bottom bolt gave me some dificulty so i brought out the ol' breaker bar and it did exactly what its name potraits. it broke the bolt. well to that damn shock out i had to cut that welded nut off the old strut body and bend the old strut fork past the ends and removed the whole assembly. things should go smooth now, just tap the headless bolt from the rubber that surrounds it inside the lower control arm. not so fast. shit wont budge so i decide to remove the lower control arm and take it to a press to get it removed. upper bolt came out great and then the breaker bar strikes again on the lower bolt. now i have two broken bolts no way to put the shit back in and im fearing i need to get it towed to a mechanic. any suggestions at this point? my head is about to explode.