Originally Posted by Running925

ok, i was givin some stuff to check by one of the Turbonetics tech's.

Min. Oil pressure 15-20psi
Max Oil pressure 80psi

Feed Line -3 or -4
Return Line Min. 5/8th

I'm also supposed to check the location of my return inlet on the oil pan, because if it's to low.. then it could cause oil back up, due to the fact that it is a gravity based return system.

* I have lookeck at the location of my oil return on my pan & it looks to be above the oil level area.. meaning that this should no be the cause of my problem.

I guess my next step will be to get ahold of my much needed Oil Pressure Sending unit for the Electronic Gauge that i already have installed in my vehicle.

I'm not sure how to check the size of my feed line.. so if anyone happens to know, please tell me how to check this.

All help is appreciated. Thanks

Tony