Originally Posted by b18c1_hatch
I heared if you had a 22 mm sway in just the rear. You would have way to much overstear and that you should get a front sway bar. Now where can i get just the front sway bar. I perfer a 00 si front sway but where can i buy them. I already have the rear.
Also i was thinking about getting LCA Prolly Omni Power and i was wondering will the ITR Sway or Tie Bar interfear with this and come in contact with the arms. even though i dont think it matters and why im Asking this question. Because i dont think the Sway bar hits the LCA. Thanks J.P.
My comptech sway is adjustable, so you don't need a front swaybar. The main purpose of the sway is the stiffen the back to remove some of the horrid understeer that front wheel drive cars have. If you put a thicker bar on the front with the thicker sway in the back, it just cancels that all out.
The sway bar's endlinks connect to the LCA, if that is what you are asking. The only interference you need to worry about is a thicker bar interfering with certain exhaust piping.