Originally Posted by bxsnypa
after i had my HU installed i lost my keyless. It was no deal tho cuz i was having an aftermarket keyless and alram installed the next week. I also noticed that my dome light does not go on when my doors are opened. It only goes on when i actually put it to the on position. Does ne1 know how i can fix this
in the dash where your old radio was, there was a green harness that plugged into the top of the radio(it was plugged into the keyless entry brain). there are two wires you need to connect that are located in that harness. try a search on this but i will see if i can find out. its been a while since i have done this so i don't want to give you wrong wire colors.
as a side note to everyone interested, you can removed the stock radio and actually hide in right behind that lower din opening. you can remove the face of the old radio by removing the screws on the side of the face and it will fit back there. then you could just place the aftermarket radio where the factory was using a dash kit. the kit really only takes on irregular shape of the opening and makes it a perfect rectangle in the middle for the aftermarket radio.