yes, if they are power mirrors, there should be a plug cliped to the door. If you have to cut the wires, the colors should match up. In my car, you only have to remove one small plate, then pry up a small part of the door panel to get to the plug. From what I've seen, yours is the same. The small plate directly behind the mirror just pulls off with a good pull. If you have to take the entire door panel off, there are about 3 or 4 screws, and the same type clips. As for the LED's, you can either extend that wire, run it through the fire wall and to the wire at the physical light, or you can find the circuit, and splice it from there.