As far as DIY projects go, the swap that I'm doing right now was going well until we tried to pull the crank pulley off to replace it with the CTR N1. Apparently the bolt is ceased. So that's being a bitch. Other DIY's that went wrong were of course the painting of interior parts (I really can't paint that well, brush, can, or otherwise). However, one of the projects that is going real well is my center console. I'm fiber glassing it to accept a DIN radio, turbo timer, and a couple of guages. At first, it was a little messed up, but with a little cutting and re-glassing is coming out better than I expected it to. I have managed to get the lines down to a T. The contour is almost 100% like stock. It still has alot of glassing to go, but it should turn out awesome.