Originally Posted by trinket
Are you bleeding the brakes in the correct sequence? It goes: RR, LF, LR, RF.
I just replaced my m.c. in my '96 Accord. The pedal would slowly go to the floor at stop signs and lights. The brakes worked good, but the pedal wouldn't hold and the car would start moving. The m.c. switch was not a hard project. The Haynes manual did a good descriptive. Good luck.
trinket
Thanks, planning to do it sometime this summer. Bought it last summer from the dealership, and its been sitting in my closet all year. Same problem as you, pedal goes to the floor, but it usually occurs when its hot, or the A/C has run. Either way, might as well replace it (trying to keep the car running as long as possible).