back to the drawing board..... I installed the inline and the same results. I can't seem to get over 60psi in the rail without my car bucking like fuel cut out or maybe even detonation. Ive never felt detonation so I don't know. It seems like the more I turn the fmu up the faster I run lean.. And I still don't understand why my a/f is fine in 1rst gear, Starts to run lean in second gear, And by third gear its completey in the red for lean. Could my speed sensor be bad causing my greddy box to give wrong mixtures. All that I want for my car is to be running the way it was when I first Installed the kit.

I am not sure if the speed sensor has anything to do with the greddy box or not but the first time that the car started to run lean was directly after I had the clutch done. Every thing is reconnected like it should be because I have verified it myself.

I am not sure if the speed sensor on hondas actually help control fuel mixtures and thats why they get excellant gas mileage. That would explain why my car leans out faster as speed increases.

my car redlines at 7200rpm. Why would mixtures be any different if I were in 1rst gear or 5th gear.

a couple of times my tach wasn't working until a couple minutes after the car was running.

If you have any more explenations or ideas... PLEASE HELP....
Summers almost over here in buffalo and my car has't been running right for months now...