Originally Posted by Integral
thanks for the tip killster, do I leave it out and off for 5 minutes and start it back up with the fuse out or do I put it in before I start her back up?
Car off and the engine cold. Remove the fuse for about 5min then put it back in, start, and let it warm up. Don't touch the pedal at all. After the car warms up let it ldle for at least 3mins, this sets the correct idle point in the ECU. Your computer is now reset.
The PCV valve in the small black plastic peice sticking up on the middle of the valve cover towards the back. It has a hose connected to it from the IM. Just pull it out of the valve cover but be careful not to break it because if its been in there a while it might be a pain to remove.