HEYA
I REEEEEEEEEEEEEALLY NEED SOME EXPERTISE HERE...
ok ok, so my vtec kicks me out at 6800 rpm (revlimit) and gives me a CEL, i checked the code and it's "22" - Vtec Pressure Switch
My car engages Vtec, and does a great job, but it's a little slower than one would expect. My first instinct is to get a new pressure switch and install it, however, being as my car is an JDM H22 swap, i had to wire into the ECU myself... i HOPE TO GOD it's not the wire job i did. However, i did pull this ecu, put in an integra ECU (to see if it worked) and put my original ECU back in... so it passed that test (ECU swap -> same problem).
I'm not even entirley sure which component is my pressure switch, on the manual it says it has a "light blue" wire, however the two components i wired are 1) green and 2) green/white can anyone post a picture of which component is the pressure switch?!
i'm really up a creek and any help would be faaaaantastic. Please help me out.
Thanks so much in advance!!!!!!
