first the top panel with the vents needs to be removed. On the bottum of the vents there is a slot, its to the outside corner and you have to look in the vent to see it. A hooked pic works the best. You can put it in the vent at the bottum and pull the panel towards you and up slightlt. aaonce the front clips give the top ones on the dash will come right with it. Behind that there is 3 screws for the top of the radio bezel.

The rest is complicated so i attatched instruction for an accessory but it tels you how to remove the shifter trim, the pocket and the coin holder.

Once those are out of the way there are 2 8mm bolts that screw up from the bottum into the radio bracket. Once those are out then the bezel is just held in with 3 clips on the bottum edge.