first get a haynes manual at the least, chiltons suck, second if you are a little unsure about working on cars then get a buddy to help or just take it to a shop. There is some stuff the book can help you with. If you get the belt back in wrong some really bad stuff can happen. And getting the balancer bolt off is a pain. I might be able to email you some pics off a timing belt disk showing the process if I can figure out how to copy it from adobe to the net. This is a book from napa on a cd that I have showing tons of cars and I used it on the last two I did and it went okay but I have been working on cars since I was 10 years old too