Originally Posted by slater442w30
I am doing a manual to auto swap for the wife
but I was hoping to have a spare engine for the car as well. The 91 runs and drives fine but the right side is caved in very badly. So will this tranny bolt into my 92? And yes I am taking the wiring harness and ecm out of the 91 if this will work.
I believe that you will just have to swap passenger side mount & possibly the rear mount bracket. You will definatly need to use the engine harness from the automatic because of the extra wires (needed for tranny), & the ECU will definatly be needed so that it will kno when to shift on it's own. Other than that u'll need your shift linkage. You shouldn't have any problems with the OBD stuff being that your not swaping the engine or anything. good luck & don't forget your grounds!
