ok, first there is a screw holding the door handle in place, also, there is another screw holding the power window/pull handle in place, make sure you unscrew those, unplug the plugs and d/c the rod from the inside door handle. once that is done, pop out the tabs and you may have to pop off the black triangular piece on the inside where the side mirror is. then, slide the panel upward because it kind of sits in a groove on the top. But good luck with the windows, i had the same prob in my 95, i replaced the window run channel, the power window regulator and and then replaced the run channel again and it did not fix the problem. hope this helps.