Thread: automagik turbo
View Single Post
Old Feb 4, 2005 | 06:59 PM
  #6  
sherwood's Avatar
sherwood
I missed Sean
 
Joined: Aug 2004
Posts: 11,285
Likes: 1
From: Fairfield/Bridgeport CT
Default

Originally Posted by 95EX1449
Dude, i have a 95 accord and I was warned about turbo.... i was told its a no no because you have to sleeve the motor because the cylinder walls are not strong enough.... if i were, you save some money and swap for and H22 and the results will make you very happy...
this was a question about the tranny, not the engine

the cyl walls can take as much as the h22 can stock for stock (they are made of the same crappy ass sleeves)
not to mention i believe the comp ratio on the h22 is a little higher than on the f22, making the f22 a lil easier to boost if anything.

i dont want to build the engine massively or anything, most likely just a dremel PnP and then minor small ammounts of boost (like no more than 4-5 PSI, the block should take that without major incident)

with that i should be looking at horsepower gains of around (hoping at least) 30 horse and torque gains of about 25-30, resulting in a higher torque than the h22 and horse numbers a maximum of 30 south of the h22's

i figure that with that torque that the accord should pull nicely wether it has the horspower or not it won't really matter to me, i'm not going to like hardcore race this thing, i just love my accord and want somthing to pick up it's beat a little
Reply