Originally Posted by VPUPPY
in that module, do you have to put the key in there? i know the DEI 555U(universal) one, you need to put he key in there. also, i would check the connections on the module(make sure its getting 12v) when the car is going to start, and the the ground activation input on the module is getting ground from the alarm. sounds like the module is not working to me though.
VPUPPY,
Thanks for your reply
The key is in the box and I verified the engine starts WITH the key prior to putting it in the box. Verified +12V and ground to the box (the only 2 connections) and I can hear the relays clicking in there when I activate the start unit.
I think it's a problem with positioning the coil around the key cylinder. When I test by holding a key near the ig switch it pretty much has to be in front of the key slot as though it were actually IN the switch. If I hold a key anywhere else (like on the side of the switch, under it, near the factory transponder unit above the switch, etc) the engine won't start. No matter where I hold the inductive loop the engine does not start
Any other thoughts ??