Here is the easyest way to bleed the clutch slave/ clutch master. First you need a small oil pump can [ what you use to oil engine parts when you are putting a motor together ] and a piece of vaccun hose about 2-3 feet long. Attatch the vaccum hose to the oil can and fill the can with brake fluid. First thing you need to do is try to remove what fluid you can from the clutch master resovore. Second make sure the clutch pedal is in the upright position, then losen the bleeder at the clutch slave about 1-2 turns then attach the vaccum hose to the bleeder screw and pump fluid in slowly you will see the resovore starting to fill up with fluid and bubbles when the fluid gets to the top of the resovor close the bleeder valve. Now the pedle should be normal you just need to bleed it 3-4 times the reuglar way now and you are done.