:werd:
i jsut got my vis cf hood and got the sparco hood pins along with it. i will never run any lightweight hood, cf or fiberglass without pins or locks. i have used sparco pins before and they work very well. my friend decided to save some bucks and got some cheapie ones, the acutal threaded pin, broken in half.
Originally Posted by Kai
I'd stick with the sparcos.
It's simple. Locate a spot on the rad support for the posts. Drill holes and install them. Mark where they hit the hood and drill two more holes. Screw dow the latch plate and adjust the posts for proper height. Close the hood and you're done.