View Single Post
Old 01-09-2005, 01:37 PM
  #1  
MCSEGeek
Registered User
 
MCSEGeek's Avatar
 
Join Date: Apr 2003
Location: Greenville, SC
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default Ignition problem.

Ok, here's the scenerio.

I got to work Friday, everything is ok. I go to lunch, ditto. I go to leave to go home and it won't start. It will turn over, but will not start.

Took a spark plug out and grounded it to the engine, no spark. Even held the plug in my hand to make sure, and no spark.

Now the manuals I have for checking the module and coil have been done and all the ohms and voltages check out good when the ignition turned on, there's even 11.5 volts at the spring on the coil with the ignition on, but the plugs won't fire. Even bought a new set of wires and cap/rotor to make sure, but still go juice.

I called a few Honda places yesterday and they all said (of course) that without them looking at it, it "sounds" like the ingition module. Well, after checking, the module for my car is $200. Anyone have any other things I can look at before dropping $200 for a module and that NOT be the problem?