i just swapped a obd1 b18c 5 speed into my 95 rs auto. i used my original engine harness and wired vtec, knock sensor, and aib to ecu. i have switched out the coil and icm from my b18b. i have 9 volts coming from yel/grn signal wire to icm and i have 12 volts at the 3 other connections on the icm. there is also 12 volts to coil. i still have no spark. is there some differnce in the jdm motor or am i missing something else? the engine turns over fine, the plugs are wet with fuel. no spark
please help