View Single Post
Old Jan 4, 2005 | 05:19 PM
  #2  
kmcaprice14's Avatar
kmcaprice14
Senior Member
 
Joined: Sep 2004
Posts: 136
Likes: 0
Default

this is for a 94....

the stick shift console is a breeze to remove. All you have to do is remove the cupholder to access its bolts (just pull it out). There may be another bolt behind the ashtray on the rear of the center console. Once this is out, you can access not only the parking brake cables, but the underside of the stick shift. There are two more bolts holding the two parts of the console together down on the parting line down where the plastic meets the fabric by the side of the seats. Unscrew the shifter (just turn it counterclockwise) to enable you to remove the forward part of the console. You can then remove the junk drawer under the radio to acess the remaining bolts... just keep going, its rather intuitive once you get started... i did it this weekend in 15 minutes without refering to my Haynes (allthough its good to have one if you don't already). Sorry its a bit vague, I dont remember every little detail.
Reply