Be prepared with lots of tools, Problem I ran into was the balljoints and the spindle nut. The ball joint puller wasn't working so I pulled out the Fork type ball joint remover and ripped the boots. Have new boots in handy. The spindle nut was a pain, I borrowed a crazy @ss 32mm wrench. pic of tools below. On top of that I was using fencing pipe as a breaker bar. Took me about 12 hours in a span of 3 days in the cold, If I had all the tools from the start could of done it in 4-6 hours. And wd40 is your friend, soak every bolt that needs to be removed night before, helps alot (liquid wrench or any penatrating oil) and use antisieze incase you F*ed up and have to tear it apart again.