As long as this is a 5th gen you are working on, you have to remove the entire piece that holds the clock (not just the black part) on the reverse side of that you will see the clock which can be unscrewed, remove the clock so you do not damage it. You will see there is an orange filter (similar to those behind the climate control buttons. This filter is held on by heated plastic type spot welds. the filter can be popped off, and replaced by another colored filter. What I used was transparancy film, printed a large box of blue and cut two, to double up thickness to replicate the same blue of the LEDs. Slide the new filters where you removed the orange one, replace clock, and reinstall the center piece above the climate control.