if you have a small wratchet(with an 8mm socket), go ahead and unscrew the ashtray/cigarette lighter assembly by removing ashtray and unscrewing the two philips head screws on the extreme left and right. there is one in the middle but do not remove that one. once the screws are gone, remove the assembly by pulling on it and it will unclip. remove all electrical connectors. once you do this you can look in and up and see the screws on the radio. you can use a socket to loosen the screw. the screw only needs to be loose cuz it is a slotted hole for the screw. its an akward way of doing it but it works fine. a stubby screw driver may be able to do this also. hope this helps.