Originally Posted by NeverBX
i have a 96 civic ex, where is the bolt to loosen the tensioner? i need to tighten my timing belt as well as reset my timing cause its off by 5-6 degrees retarded. which line on the pulley is TDC, the white? red? so what im gonna do is put my crank pulley at TDC and my cam at TDC then retighten the belt. will this work or is there a better and easier way?
also my turn signal arm is not clicking back to position after i make a left or right turn, meaning when I signal for a turn; after I complete the turn and the wheel goes back to neutral position my signal is still going, I even tried turning the wheel all the way the opposite and it was still flashing. how do i fix this?
thanks for any help
The tensioner bolt is underneath the timing cover. There should be a piece/grommet that you can pull off of the timing cover and get to the bolt, without having to remove the cover. The white mark on the crank is TDC. Is your cam timing or ignition timing off?
As for the turn signal arm, the easiest way would probably be to get a replacement from a junkard and swap them out.
__________________
2015 Ford Mustang GT Fastback - Ingot Silver - 6M - Performance Package - Gibson Catback, JLT CAI, FR 47lb injectors, BAMA E85 tune, Eibach Sportline, BMR wheel hop kit, UPR oil separator, Steeda shifter bushing/bracket
Team B.O.B.® - Ballaz on a Budget