Thread: Questions about adding vtec wiring *pics*
View Single Post
Old Nov 16, 2004 | 05:23 AM
  #3  
westcoaststyle's Avatar
westcoaststyle
Still here... sorta...
 
Joined: Sep 2000
Posts: 17,177
Likes: 2
From: CO
Default
You could do that, or you could just figure out which wires in the engine harness go to the VTEC solenoid and VTEC Oil Pressure Sensor.

This should help: http://www.hybridgarage.com/tech/5gt...html#ECUpinout

I would just run the wires from the ECU, through the firewall, and up to the group of plugs at the passenger's side strut tower. Connect the wires there.

hih

:edit: oh, and btw, excellent work on the harness. You should be very proud of yourself for taking the time to clean that all up and make it new again. Good job! :goodjob:
Last edited by westcoaststyle; Nov 16, 2004 at 05:31 AM.
Reply
0