I'm still scratching my head here. I can turn one of the things that the cv joint goes into with a pair of pliars. This is off course with my old trans that is now out of the car(the one that would not go in first). When i turn one side, the other side turns. I think i can recall turning one wheel and the other spinning. Does anybody know this for sure. This will confirm my new used tranny being offically messed up if it is suppossed to. I'm also thinking it could be my clutch disk stripped out on the shaft. I kind of forced the tranny onto it and it would not go. I then took the clutch disk back off and had to dremel it a little to make it slide easily onto the shaft. I could have dremeled it to much causing it to slip on the shaft.