Originally Posted by next157
you can purchase the omni power, skunk2, ingalls, for less than 2 hundred for the front. And intall on them is very easy (at least the control arm one is). I even think omni has specials for front and rear for a pretty cheap price like $250 or so, I remember seeing it awhile back not sure if they still do. But you can probably get away with washers in the back since those tires don't turn, they won;t wear out that fast.
yeah, I was looking into that rear camber washer trick... I found this
Originally Posted by NeverBX
actually you dont even need longer bolts, just the washers 3 per bolt so you will need 12 total. but i just went ahead and got longer bolts anyway. i think the bolt you need is a m10 make sure the tread is 1.25 and not 1.5 or it wont go in right. and make sure you put the washers between the body and the arm not the arm and the bolt head.
I want the longer bolts anyways.... is that size correct? (m10 thread 1.25)
I've heard 1/32 washers is the correct size?
I still haven't even looked at front kits yet....