How about a diagram of how your coilovers(any brand) go in. I need to see how others are installed so that I may fix mine.

Right now I am thinking of cutting off the lowwer bushing cups on the strut mounts. Boring the holes in the tophats just enough to let the little sleeves in the bushings slide. Putting the tophats against the bottom of the upper bushing cups with a thin pieces of rubber(maybe old tire sidewall) between them to prevent noise and scraping. Then putting the strut bushings in the upper bushing cups and the bottom of the tophats. This way the tophat will stop moving with the strut bushings.

Any comments suggestions?