status of swap 220 am thursday morning. DONE!!!! W000000000T!




run ins today:

1. lots of seized bolts from manifolds we had to take out

2. exhuast manifold and cat bolted up (whew) but was like 1/2 inch off. we had to pull the exhuast up a little and buy some home depot extended bolts to make it bolt up.... whew! ...no open header...thank gawd.

3. wiring went almost like a breeze. i have good friends with great knowledge

4. map sensor was plugged incorrectly on startup. corrected and ran so smooth after

5. exhaustion :chuckles:




special thanks to (no particular order):


agent87 -- for his help, tools and garage

e30dood -- for his help and great knowledge on working on hondas

rick aka DakarM -- for usage of his air compressor that saved us so much time

airon -- for the hookup of the motor and parts. your GSR lives on!!!! :rockon:

super laubo -- for the help in pulling the motor out of airons car

inspyral -- for lending me the engine hoist and LS manifold


(not members on board): marc, arnel, mr/mrs. avila and casey.





project usdm civic ferio is finished. pictures will be up very soon