I taught myself all of this

FOR EK CLUSTER

very =easy
2 upside down screws
2 clips on bottom corners right above steering wheel

unscrew. push down tilt. pull from bottom corners straight out. bich because the damned clips fell off.

4 screws hold the cluster in, unplug, pull out. (I used to never pull it out installing gauge faces...talk about sweat)

everything after that clips apart, untwist the bulb, unscrew gauges from back.


FOR EK CLIMATE CONTROL

again easy stuff

Gotta take off the part under steerin wheel for the clip you dropped from the cluster anyway.

3 screws, maybe one in change pocket. 2 clips on left side, 1 by steering wheel on left side, one on right.

CLIMATE
hmm I recall 5 screws. 2 upside down above shifter, 1 hiding under the left dash piece you just took off, 2 in glove compartment.

4 hidden upside down screws holding it to a metal bracket. 4 clips..2 on either side of climate control


damn if that's not the worst explination ever. once I started had to finish. remember if its to hard to pull look for a screw. pull all clips straight out. don't get pissed when they pop off and you hear em jingle through the dash. get pissed when you break or lose them. never write a how-to when your drunk.