Originally Posted by mondial
Hi guys. I know this thread is old but just in case. I have a Accord 2.0iS (UK) sounds similar to the 2.0.EX USA. I tried in vain this weekend to remove the pulley bolt. I was going to buy the pulley attachment tool to hold the crank solid. Costs about £62 $85 us dollars. Reckon the extensions and a length og pipe in my raker bar should do it. Any comments
5ft length of pipe over the end of my breaker bar did the trick for me. Some guys say leave the car in 5th gear and put it on the ground and you don't need the pulley tool. I used the tool, though.