HEYA
first, yall are awesome and thanks in advance for the help
second, i need HELP. Ok, so i HAD a 92 Lude Si, then i threw at rod at 200K, then i dropped a JDM H22A in there and it's awesome, HOWEVER, when i got the engine it didn't come with an ECU, so i bought one off of Ebay "with a skunk2 chip". Then, i put the ECU in and hook it up (with new wiring) and THIS HAPPENS:
I rev limit at 6,500. I Vtec at 5,200. I govern at 120. If i'm in VTEC for too long, my check engine light goes on and cuts VTEC off (too long being like 13-15 seconds). That only really happens when i'm in 4th or 5th, cause who needs VTEC for that long?? AAAAND if you're wondering why that's still a long time? it's because i can't get up to 7K and past, where i SHOULD be able to go, i REVLIMI AT 6500!!!!
SOOOOOOOOO i bought a JUN ECU off of ebay and i installed it, flashed it made sure the connections were good, THEN I IDLED AT 2K (even with throttle adjustment) AND REVLIMITED AT 4K!! WTF?!?!
Ebay ECU that i bought and recently put in
so now i'm using the OLD ebay ecu, with the Si revlimit and governor.
If anyone has ANY insight, or any ideas. PLEASE PLEASE tell me.
thank you
so much
- Bandit